Cemintel Barestone prefinished panels are extremely popular for a raw, contemporary finish to many internal applications.
Barestone is available in four colours – Original, Ash, Lunar and Graphite. Ash, Lunar and Graphite add colour depth while maintaining the raw, natural appeal of the much-loved Original.
The panels have a stain resistant coating applied and are simply installed internally with either split battens, adhering to timber battens, and for a more industrial look, exposed fixing.
**Internal Original, Ash & Lunar Samples unavailable. We apologise for any inconvenience caused **
Internal Linings
BARESTONE INTERNAL SPECIFICATION DETAILS
Manufacturer : CSR Cemintel
Range : Barestone Internal
Colour : Original / Ash / Lunar / Graphite
Finish : Factory pre-finished with Cemintel stain resisting treatment
Thickness : 9mm
Sheet size : 3000mm X 1200mm
Installation :
Express jointed internal cladding system installed strictly in accordance to manufacturers specification as set out in the CSR Cemintel Barestone External Design and Installation Guide.
>Download Installation Guide
| Result | |
|---|---|
| Applications | Internal Linings |
| Type of Building Structure | Residential Housing Buildings within the scope of AS4055, Commercial & Other |
| Wet Areas | No |
| Dimensional/Geometrical Characteristic | Specification | Manufacturing Tolerance | Relevant Standard |
|---|---|---|---|
| Panel Width | 1200mm | +0 -2 mm | |
| Panel Length | 2400mm | +0 -2 mm | |
| Panel Thickness | 9mm | +10% -0 mm | |
| Profile | Square Edge | ||
| Perpendicularity/squareness of edges | 1mm/linear meter | ||
| Weight (typical) | 17.8kg/m2 | ||
| Layout Options | Horizontal, Vertical | ||
| Jointing | Expressed |
| Physical Property | Result | Relevant Standard |
|---|---|---|
| Modulus of Rupture (Wet) | >18MPa | AS2908.2 |
| Modulus of Elasticity (Wet) | 9-13GPa | AS2908.2 |
| Density (Oven Dry) | 1625 kg/m3 | AS2908.2 |
| Water Vapor Diff usion | Not Required | Not Required |
| Water Tightness (24hrs) | No water droplet | AS2908.2 |
| Water Absorption (Saturated – 48hrs) | 18 wt% | ASTM C 1186 |
| Moisture Content (EMC) | 7 Wt % | ASTM C 1186 |
| Moisture Movement | 0.04% | ASTM C 1186 |
| Test | Result | Relevant Standard |
|---|---|---|
| Heat Rain | PASSED (25 Cycles) | AS2908.2 |
| Freeze Thaw | PASSED (50 Cycles) | AS2908.2 |
| Warm Water Resistance | PASSED (56 days) | AS2908.2 |
| Soak Dry | PASSED (25 Cycles) | AS2908.2 |
| Characteristic | Result | Relevant Standard |
|---|---|---|
| Finish | Prefinished | |
| Coating Type | Coating Type: Silane (Stain Resistant) *Resistant to standard household markings, however must be cleaned off immediately to avoid permanent staining. | |
| Colour Bodied | No - Barestone Original Yes - Barestone Colours |
|
| Paint Type | ||
| UV Resistance | N/A | N/A |
| Formaldehyde Emission Rate | Meets Green Building Council Office Design IEQ-14 Requirements for <0.1mg/m2/hr | ASTM D5116 |
| VOC Emission Rate | Meets Green Building Council Office Design IEQ-14 Requirements for <0.5mg/m2/hr | ASTM D5116 |
| Spectral Reflectivity Values | Solar Reflectance % | Solar Absorption % | Basix Colour | Relevant Standard |
|---|---|---|---|---|
| Internal Original | 39.8 | 60.2 +/- 1.2 | Medium | ASTM E903-12 |
| Internal Ash | 23.9 | 76 +/- 0.7 | Dark | ASTM E903-12 |
| Internal Graphite | 8.7 | 91.3 +/- 0.3 | Dark | ASTM E903-12 |
| Internal Lunar | 14.3 | 85.7 +/- 0.4 | Dark | ASTM E903-12 |
| Characteristic | Result | Relevant Standard |
|---|---|---|
| FIRE RESISTANCE | ||
| Combustibility | Suitable for use in applications where non-combustible materials are specified by the Deemed to Satisfy Provisions of the BCA Vol 1 Clause C1.9 | |
| Fire Hazard Properties | Group Number 1 SMOGRARC <100 Standard AS5637.1 |
AS/NZ 3837 |
| Classification | ||
| Surface Burning Characteristics | ||
| THERMAL CONDUCTIVITY | ||
| Thermal Conductivity ( λ-Factor) | ≈ 0.4108 W/m.K. | |
| Thermal Expansion Co-efficient | 0.005-0.01mm/mK | N/A |
| ACOUSTIC VALUE | ||
| Sound reduction (depends on construction) | N/A | N/A |
| Characteristic | Result | Relevant Standard |
|---|---|---|
| Within Scope of AS4055? | Yes | |
| Wind Loading - Residential housing buildings within the scope of AS4055 | N/A | |
| Weatherproofing | Assessed for serviceability loads to 2.5kPa | N/A |
| Cyclonic Conditions | Tested and assessed to 7.0 kPa | N/A |
| Fire Resistance Limits (FRLs) | N/A | N/A |
| Bushfire Construction | N/A | N/A |
| Acoustic | N/A | N/A |
| Thermal | N/A | N/A |
| Characteristic | |
|---|---|
| Maximum Span (Stud Spacing) | Up to 600mm |
| DIRECT FIX | |
| Nail to Timber Frame | No |
| Screw to Timber Frame | Yes |
| Screw to Steel Frame | Yes |
| INDIRECT FIX | |
| Timber Frame | Yes |
| Steel Frame | Yes |
| Masonry Frame | Yes (refer to Designlink for custom solution) |
| EXPOSED FASTENERS | |
| Screw | Yes |
| Rivet | Yes |
| Nail | No |
| CONCEALED FASTENERS | |
| Clip | No |
| Countersunk Screw/Nail | Yes |
| Adhesive, Split Batten, etc. | Yes |
| Hidden by Overlapping Panel | No |
| Flush Jointed (Taped) | No |
